mini jacks 6 pole jack application example lgk1508-0101f LGK2309-0101 lgk1708-0201f lgk2308-0301f 7 6 2 4 5 3 1 switch stereo sensor gnd or switch receiver (monaural or l) microphone gnd or switch receiver (r) 8 7 2 3 6 5 4 1 switch stereo sensor gnd receiver (monaural or l) microphone receiver (r) detection method of plug insertion 2.5mm dia. jack, sa series features 1. a 2.5 mm dia. multi-pole jack developed for small portable equipment. 2. usable in both hands-free operation and stereo music listening, and well operable. 3. compatibly usable in place of previously available 3p and 4p products. 4. a structure (make-switch) allowing for direct contact of switch terminals with the plug, with the switch terminals sensing detection of a plug, and thus, enhanced reliability in contact performance. 5. model lgy1508-0101f is the world shortest 3.6 mm and narrowest 6.6 mm, an excellent choice when designing smaller information terminal equipment. 6. a sufficiently long 10,000-cycle life to meet requirements for increased insertion/ withdrawal times of earphones. cell phones, phs phones, pda equipment, digital still cameras, etc. for detection of plug insertion, the type m mini jack, a make system product, is now available, in addition to the previously marketed break system mini jack (type b). upon insertion of a plug, the make switch terminal comes into contact with the ground terminal of the jack via the ground section of the plug (on to off funciton). thus, all terminals will come into contact with the plug for elevated reliability in contact (a self-cleaning effect). applications (ground) (ring) (tip) (break switch) break switch system make switch system (ground) (ring) (tip) (make switch)
mini jacks lgk1508-0101f (6 pole) smd type 7 6 2 4 5 3 1 circuits (500pcs/reel) 1.5 2 3.6 max. 6.6 max. 3.5 5 2.5 8.5 5.2 2.6 2- 1 0.4 max. 1.2 2.5 5 1.2 1 1 3.2 3.2 5.1 7 1.6x2.2 (land) 2 1.2 (hole) 2.7 2.7 no printed this area 2 3 7 4 1 6 5 lgk1708-0201f (6 pole) smd type 7 6 2 4 5 3 1 circuits (500pcs/reel) 3.5 8 3.6 1.7 2 1 5.5 3.4 9 5.2 2.6 0.5 4 4 6 1.9 1.9 1.6 0.4 5.5 0.3 0.3 7 1.6x2.6 (land) 2 1.4 (hole) 3.4 2.5 7 2 1 5 6 4 3 lgk2308-0301f (recommended p.w.board dimension) (the pattern side) (6 pole) smd type 7 6 2 4 5 3 1 circuits (500pcs/reel) 0.55 2.3 1.8 8.2 0.7 4 5.2 2.6 3.4 9.1 6 1 6-1.8x2.6 2- 1.4 8.3 3.4 8.3 7.3 3.5 1.3 2 4 0.3 0.4 1.3 1.6x2.6 (land) (land) 2.3 1.5 5 1 4 3 6 7 2 (hole) 2.5mm dia. jack, sa series type-m type-m type-m (recommended p.w.board dimension) (the pattern side) (recommended p.w.board dimension) (the pattern side)
mini jacks 7.8 4.7 2.3 0.5 5.2 2.6 3.4 9.6 0.3 (recommended p.w.board dimension) (the pattern side) LGK2309-0101 (6 pole) smd type 8 7 2 3 6 5 4 1 circuits (500pcs/reel) 2 3 5 1 6 4 8 7 6.4 5 2- 1.4 2-1.1 (hole) (land) 4-1.8x2.6 (land) 2-1.8x2.3 1.3 1.9 6.6 5.6 7.9 9.3 0.3 2-1 2-1.8 6.6 9.1 2-2.6 1.3 2 2 2.5 2.7 llp6037-1000 8 7 2 3 6 5 4 1 circuits plug 11 5.5 10 7.3max. 2.5 10.4 7 2.2 20.5 1000 10 3.5 2 6 3 soldering 0.7max. 2.5mm dia. jack, sa series plug type-b
|
